Det er ikke kun af optiske grunde, at det er af betydning at behandle gulve i for eksempel garagen, industrihaller eller storkøkkener. Med farvede beskyttelsesbelægninger beskyttes disse gulve vedvarende mod mekaniske skader og mod indtrængning af flydende stoffer.

Vis referencer

Dampspærre på ikke-tætnede betongulve

1 Fugtig beton med høj alkalitet
KÖSTER
2 Dampspærre
KÖSTER VAP 2000
3 Gulvbelægning
KÖSTER LF-VL
KÖSTER PS Flex

Betongulve med tilbagevendende gennemfugtning kan være problematiske i forhold til efterfølgende behandling eller gulvbelægning, da hugt og høj alkalitet ofte kan føre til afskalning af belægningen eller til såkaldt "osmotisk blæredannelse". I disse tilfælde skal der ske en grunding med et produkt der opnår meget god vedhæftning, har en meget høj dampspærrende virkning og er meget bestandigt mod høj alkalinitet.

KÖSTER VAP 2000 er en sådan specialbelægning. Den påføres på den slyngrensede, bæredygtige undergrund, der er renset for skillende substanser.  Efter gennemhærdning påføres dæklaget (for eksempel KÖSTER EM-VS) eller gulvbelægningen.

Angivelserne i produkternes brochurer er gældende.

KÖSTER BTG System

Gulvbelægning ved moderat belastning

3 Overfladebeskyttelse
KÖSTER Silikonemaling hvid

Betongulve med moderat belastning kan ideelt og enkelt forsegles dekorativt med KÖSTER EM-VS. Belægningen påføres i to arbejdsgange på den forberedte, tørre og rene undergrund, der er renset for alle skillende substanser.

En behandling af vægge kan ske med KÖSTER Silikonemaling hvid.

Angivelserne i produkternes brochurer er gældende.

Gulvbelægning ved tung belastning

1 Substrate
KÖSTER
2 Primer
KÖSTER 121
KÖSTER VAP 2000
3 Slip resistance (optional)
KÖSTER Antirutschgranulat 20
KÖSTER Quarz Sand
4 Floor coating
KÖSTER LF-VL

Belægninger på betongulve med tung belastning udføres med KÖSTER LF-BM, der påføres på den rene og tørre undergrund, der er fri for skillende substanser. Ved iblanding af kvartssand i belægningen opnåes en meget høj mekanisk styrke.

Tilsluttende vægge kan males med KÖSTER Silikonemaling hvid.

Angivelserne i produkternes brochurer er gældende.

Parking garages and trafficked surfaces with high mechanical stresses

1 Substrate
KÖSTER
2 Primer
KÖSTER 121
4 Top Coat
KÖSTER CT 221

Parking garages and trafficked areas have especially high requirements on coatings. The KÖSTER OS 8 System is a highly resistant, easy to apply solution.

Surface preparation is critical and should result in a clean, dry surface free of all bond-inhibiting materials. KÖSTER CT 121 mixed with KÖSTER Quartz Sand MA 30 (1:1) is used as a primer and applied with a standard trowel. Immediately afterwards, the primed surface is spread with a roller and subsequently broadcasted with KÖSTER CT Quartz Sand MA 20. Through the broadcast with KÖSTER Quartz Sand a very high mechanical resistance is attained as well as a high slip resistance.

After excess Quartz Sand has been removed, the top coat consisting of the solvent-free KÖSTER CT
221 is applied. The KÖSTER OS 8 system has been tested according to the DIN EN 1504-2 guideline and fulfills the supplementary standard DIN V 18026.

Always adhere to the specifications in the respective Technical Guidelines.

Hygienic protective coating for the food production industry

1 Substrate
KÖSTER
2 Floor coating and underlayment
KÖSTER UC Pigment Paste

KÖSTER UC combines properties of mineral floor leveling materials (leveling and repair of mineral substrates) and reactive resin coatings (protection against penetrating substances and damage as well as decorative design) in one product. It is based on a polymer binder (polyurethane) and mineral fillers. KÖSTER UC Systems can therefore be used in a wide variety of fields of application with high demands on the coating such as in the food production industry (production, kitchens) as well as in chemical and pharmaceutical industries. KÖSTER UC can be installed in new construction projects (retail) and in the renovation of production areas which must be quickly open to traffic.

In order to ensure a successful application, the substrate must be properly prepared by shotblasting. The three-part KÖSTER UC System is made up of: KÖSTER UC 100, a self-leveling urethane cement flooring system for smaller layer thicknesses; KÖSTER UC 200, a trowel applied urethane cement flooring system for higher layer thicknesses; and KÖSTER UC 300, a very thin-layer urethane cement flooring system, which can be used as a primer or top coat, depending on the circumstances. Additionally, KÖSTER UC Pigment Paste can be used to color any of the KÖSTER UC flooring system to meet decorative requirements.

Always adhere to the specifications in the respective Technical Guidelines.

 

 

 

Back

Top
Albania Austria Bosnia and Herzegovina Brasil Bulgaria China Croatia Czech Republic Denmark Finland Germany Ghana Greece Hungary Italy Japan Kazakhstan Kuwait Latvia Lebanon Macedonia Mexico Netherlands New Zealand Norway Panama Poland Portugal Romania Russia Senegal Serbia Slovakia Slovenia South Africa Spain Thailand Turkey Ukraine United Kingdom United States of America