Search
|
5 - | Restoration Plasters, fast setting cements, special mortars |
 | Waterproof, weatherproof, fast curing mortar with high compressive strength (sets after approx. 1 minute) for fast installations as well as for small repairs of masonry and concrete. Free of soda and chlorides. |
 | Waterproof, weatherproof, fast curing mortar with high compressive strength (sets after approx. 5 minutes) for fast installations as well as for small repairs of masonry and concrete. Free of soda and chlorides. |
 | Mineral setting accelerator as on additive for cement based plasters, screeds, and masonry mortars. For controlling the curing time. |
 | Hydrophobic, pressurized water resistant mortar with special bonding agents suitable for fillets, repairs and as a barrier-plaster. When mixed with KÖSTER SB Bonding Emulsion it becomes a PCC Mortar. |
 | Slightly expanding, hydrophobic, fast setting repair mortar which is resistant to pressurized water. When mixed with KÖSTER SB Bonding Emulsion it becomes a PCC Mortar. |
 | Suitable for large reprofiling and repair works, has excellent workability characteristics and adhesion to old and new mineral building substrates. KÖSTER Repair Mortar NC is characterized by high chemical and mechanical resistance and compressive strength. Fiber reinforced. Also suitable as substrate preparation for corrosion protection with KÖSTER PSM or KÖSTER Silicate Mortar, e. g. in industrial chimneys, sewer systems, or other concrete structures which are exposed to low pH environments. |
 | Sulphate resistant, salt storing, diffusion open base plaster. For levelling uneven substrates. |
 | Diffusion-open, salt-resistant, high compressive strength, white restoration plaster with very high porosity and hydrophobicity. It prevents or reduces the formation of condensate. It can be applied manually or by machine.
Watch the KÖSTER Restoration Plaster application video! |
 | Fine-grained, diffusion-open cement based, water-repelling plaster coat for application on top of KÖSTER Restoration Plasters. |
 | Self leveling underlayment to form an isolation barrier between a permanently moisture burdened floor or floor contaminated with soluble silicates and the subsequent moisture mitigation system.
KÖSTER Self Leveling IB does not contain gypsum or silica sand and it is resistant to hydrolysis and permanent high alkalinity. The underlayment is resistant to foot traffic soon after installation and it is resistant to abrasion and wear. |
 | Single-component, self-levelling, gypsum-free floor screed for levelling uneven floors. Very high compressive strength. It can be walked on after 3 hours, it is abrasion and wear resistant. Recommended layer thickness: 2 – 15 mm |
 | Multi-purpose, 2-component, frost resistant adhesive mortar for tiling and natural flagstone. |
 | Single component, mineral flexible adhesive for all mineral building materials in construction. In combination with the KÖSTER BD System suitable for waterproofing wet rooms. |
 | 2-component, highly chemically resistant special silicate based mortar for vertical and horizontal areas, e.g. in sewage works or in case of high chemical stresses. Also suitable for damp substrates. Fields of application from pH 0 to pH 7. |
 | 2-component, highly chemical resistant special silicate based mortar for vertical and horizontal areas, e.g. in sewage works or in case of high chemical stresses. Also suitable for damp substrates. Field of application from pH 0 to pH 7. The HT version is suitable for use in high temperature climates. |
 | Three-component, highly chemical resistant, silicate and polymer based special mineral mortar for waterproofing horizontal and vertical areas which require very high acid resistance in the area of ph 0 – 8. Suitable for dry substrates, easy to apply. |
 | Shrink-free, fast curing multi purpose mortar for concrete restoration. In particular suitable for the protection of exposed reinforcement steel: It unites corrosion protection, coarse mortar, fine filler and bonding bridge in one product. For layer thicknesses from 0 – 60 mm. |
 | For the repair and maintenance of concrete surfaces. Waterproof and tension free after full cure. Synthetically modified, waterproof fine filler for the smoothing of concrete surfaces. |
 | Specially designed light weight mortar for repair- and reprofiling work in overhead and vertical areas. Shrink-free, high compressive strength, waterproof. Suitable for all mineral substrates. |
 | Fast curing grout mortar with high final compressive and flexural strength and very high slump flow for all construction and repair applications. Ready to receive traffic after 3 hours. Fields of application include road surfaces, warehouse ramps, man holes or as a grout for installations and achor holes. |
 | White mineral paint suitable for inside and outside areas. KÖSTER MF 1 is delivered in powder form, effective against algae, mold and fungi and free of fungicial toxins. |
 | Injection grout for the restoration of structural strength in cracks or voids in masonry and concrete. KÖSTER Micro Grout 1C possesses a high compressive strength, is shrink free and does not show sedimentation during its pot life. Fields of application include crack injection also in overhead areas, filling of voids as well as the grouting of masonry anchors. |
|
|
