Search
|
12 - | Machines, tools, aids |
 | Special brush for the application of liquid materials, e.g. KÖSTER Dachflex®, KÖSTER KD 3, etc. |
 | Special stirrer for mixing 2-component polymer modified bitumen thick film sealants, e.g. KÖSTER Deuxan® 2C and KÖSTER Bikuthan® 2C. |
 | For the even installation of e.g. KÖSTER Self Levelling Floor 15 in the desired layer thickness of 0 - 30 mm. Continuously adjustable, changeable steel sheet and gliding vats made of hardened steel. |
 | Special brush with waved bristles for the application of materials with a paste-like consistency, e. g. KÖSTER NB Sealing Slurries, KÖSTER KD 1, etc. |
 | For de-airing floor coatings. |
 | Robust, smooth gloves for applying of KÖSTER waterproofing slurries. |
 | Plastic angle for the pressureless and material saving installation of horizontal barriers against rising damp (wicking moisture) with the KÖSTER Suction Angle System. Re-usable. |
 | Special port for continuous pressure grouting. |
 | Adapter for use in combination with the KÖSTER Patented Port System. |
 | Sleeve for the KÖSTER Patented Port. |
 | Plastic cylinder for installing impact packers. |
 | Plastic cylinder for installing impact packers. |
 | Plastic packer with cone-head fitting and non-return valve for low-pressure resin injection. |
 | Plastic packer with cap for low-pressure grout injection. |
 | Adapter for connecting KÖSTER Impact Packers 18 and KÖSTER Impact Packers 18 Plus. |
 | Plastic packer with non-return valve for the low-pressure injection of resins and gel. |
 | Injection lance with pan-head fitting for gel curtain injections and a guide bar for the lateral distribution of the injection material. German patent, European patent. |
 | Injection lance with pan-head fitting for gel injections. |
 | The KÖSTER ONE-DAY-SITE Packer allows injection work to be completed in one day.
The screw packer for pressure injection has a firmly mounted cone-head fitting and non-return valve. Therefore, immediately after injecting, that part of the port which protrudes from the wall can be unscrewed and removed. The central part of the port stays in the wall sealing the borehole so that no injection material can flow out of the borehole even under high pressure. The borehole can then be closed immediately after injection.
Optional: All packers can also be delivered with loosely mounted cone-head fittings or pan-head fittings. |
 | The KÖSTER Superpacker is particularly suitable for pressure injections.
The KÖSTER Superpacker provides a very high contact pressure to the borehole due to the cone-shaped center of the tightening mechanism. Four fins and two ridges on the rubber gasket prevent rotation during tightening and facilitate the optimal fixation of the packer in the borehole. It has a firmly mounted cone-head fitting for pressure injection and is galvanised.
Optional: All packers can also be delivered with loosely mounted cone-head fittings or pan-head fittings. |
 | Electrical 1C injection pump for injecting of cracks and voids. It is suitable for the injection of all KÖSTER KB-Pur® materials (foams and resins). Operating pressure can be adjusted from 0 - 200 bar. The maximum delivery rate is approx. 2.2 l / min. |
 | with grip head for the KÖSTER 1C Injection Pump. |
 | Manual membrane pump for pumping and injecting liquid products. |
 | Length 5 m |
 | Electrical 2C injection pump with stageless adjustable mixing ratio (gel : water). Operating pressure is approx. 30 bar. The maximum delivery rate is approx. 2.5 l / min. |
 | with 4 jaws for cone-head fittings. |
 | For small injection projects or areas which are difficult to access. Operating pressure 10 bar max., output approx. 2 cm³ per pass. |
 | For small injection projects or areas which are difficult to access. Operating pressure 10 bar max., output approx. 2 cm³ per pass. |
 | Injection hose for the KÖSTER 1C Injection Pump (length: 5 m). |
 | Length 300 mm |
 | Available length: 500 mm or 300 mm |
 | Manual membrane pump for the pumping and injection of grouts. |
 | for the KÖSTER 1C Injection Pump. |
 | 6l material hopper with sieve for the KÖSTER 1C Injection Pump. |
 | Allows for the injection of cracks to be carried out without prior drilling or the fixation of adhesive packers. The KÖSTER Pressure Port is particularly suitable for large or aesthetic applications such as in parking decks. The packer is pressed onto on the construction member using a tripod or a forklift. Subsequent injections are possible at any time. |
 | Sieve for the material hopper of the KÖSTER 1C Injection Pump. |
 | Connection between injection whip and slide coupling. Length 30 mm |
 | Electrical spiral pump (400 V) for the pumping and spraying of plasters and mortars. Capacity: approx. 0.2 to 1.2 m³/ h (spiral and material dependent), feed distance: up to approx. 40 m (material dependent). |
 | Length: 5 m |
 | Conical round brush for cleaning voids at cable and pathway penetrations. |
 | For cleaning tools. |
 | Accessories for the application of KÖSTER KB-Flex 200 Sealing Paste with a flexible hose and 45° bend. |
 | Specially designed for mixing injection resins (reduces air entrainment).
12 mm chuck, round. |
 | For the application of KÖSTER KB-Flex 200 Sealing Paste, etc. |
 | Cartridge gun for the application of KÖSTER KB-Flex 200. |
 | For the KÖSTER Single Paddle Mixer. With ring, suitable for the mixing of self-levelling screeds, sealing slurries, injection mortars, etc. |
 | Electric compulsory mixer, especially suitable for paste-like and highly viscous mortars, plasters, adhesives, bitumen, etc. 1400 Watt, 220 V, delivered including mortar stirrer. |
 | For the KÖSTER Single Paddle Mixer. Suitable for mixing thick and paste-like materials, restoration plasters, adhesives, mortars, tile adhesives, etc. |
 | For the KÖSTER Double Paddle Mixer. The set consists of one right-handed and one left-handed mortar stirrer. |
 | Electric multi-purpose mixer for materials with low and high viscosity. 1300 Watt, 220 V, stageless adjustable. Delivered including mortar stirrer and disc stirrer. |
 | For the safe application of KÖSTER KSK waterproofing membranes. |
 | For quick diagnosis of construction materials on site, salt analysis and pH. |
 | For evaluating the surface moisture of construction members. |
|
|
